I want to use one SignStix player for multiple screens in the video wall

I want to use one SignStix player for multiple screens in the video wall


The standard approach for a video wall is to use 1 SignStix player per panel. This is because the maximum pixels a M12S player can decode is 1920 x 1080. However, this may still be possible using a HDMI splitter and would require testing. In the below scenario the resolution is 1920 x 2160. If applying a video, the best option may be to leave SignStix in landscape mode and pre-rotate the video (either prior to upload, or using SignStix 'Convert to Portrait' upload profile).

 


          1920

 

 


2160

    • Related Articles

    • How to set up a video wall?

      A video wall is a combination of 2 or more screens or panels which have been mounted in a rectangular arrangement.  They operate together as one large canvas for displaying digital signage and video content.   Setting up a video wall is relatively ...

    • Why isn't my video wall working properly?

      Some of the panels are showing the wrong part of the sign This is very likely to be a device configuration issue.  Locate your device in ‘Device Admin’ and check that its video-wall settings have the correct geometry. Check your measurements against ...

    • Can I have two video boxes on one sign?

      Unfortunately not, it is only possible to have one video box on any one sign. However, if you have multiple videos that you would like to display, you can add these to the same playlist. This means that when you assign the playlist to a sign with a ...

    • Why is my video wall out-of-sync?

      There are a number of reasons why a video wall is playing out-of-sync.  Please try the following methods: Check in the Devices section of your SignStix account that the devices have the correct synchronisation method set. Check in the Devices section ...

    • How does the SignStix player app work?

      Download the SignStix Player app: https://cms.signstix.com/player.apk Directions for use: Install and run the app, then follow the instructions on the Device Registration page which appears. Please see section 6 about Registration on this page  for ...